Are you looking for laser cutting china supplier?Wonder industries ltd., Has More Than 15 year's Professional Experience In The Precision Laser Cutting And Sheet Metal And Other Cutting Service To Suit All Your Needs.Get Instant Quote:[email protected] .

Do you know how to keep the square tube?

Do you know how to keep the square tube?

1. Choose a suitable venue and warehouse

(1) The site or warehouse for storing steel pipes should be located in a clean place with unobstructed drainage, far away from factories and mines that produce harmful gases or dust. Weeds and all debris should be removed on the field, and the steel pipe should be kept clean;

(2) In the warehouse, it shall not be piled with acid, alkali, salt, cement and other materials that are corrosive to steel pipes. Different types of steel pipes should be stacked separately to prevent confusion and contact corrosion;

(3) Large section steel, rails, steel plates, large-diameter steel pipes, forgings, etc. can be stacked in the open air;

(4) Small and medium-sized steel bars, wire rods, steel bars, medium-diameter steel pipes, steel wires and wire ropes, etc., can be stored in a well-ventilated material shed, but they must be topped and bottomed;

(5) Some small steel pipes, thin steel plates, steel strips, silicon steel sheets, small-caliber or thin-wall steel pipes, various cold-rolled and cold-drawn steel pipes, and high-priced and easily corrosive metal products can be stored in the warehouse;

(6) The warehouse should be selected according to geographical conditions. Generally, an ordinary closed warehouse is used, that is, a warehouse with a roof, a wall, tight doors and windows, and a ventilation device;

(7) The warehouse is required to be ventilated on sunny days, shut down to prevent moisture on rainy days, and always maintain a suitable storage environment

2. Reasonable stacking, put first in first

(1) The principle requirement of stacking is to stack according to varieties and specifications under the conditions of stable stacking and safety. Different types of materials should be stacked separately to prevent confusion and mutual corrosion;

(2) It is forbidden to store items that are corrosive to steel pipes near the stack;

(3) The bottom of the stack should be high, firm and flat to prevent the material from being damp or deformed;

(4) The same materials are stacked separately according to the order of storage, which is convenient to implement the principle of first-in, first-mover;

(5) For section steel stacked in the open, there must be wooden mats or stones underneath, and the stacking surface is slightly inclined to facilitate drainage, and the materials should be placed straight to prevent bending and deformation;

(6) The stacking height is not more than 1.2m for manual operations, not more than 1.5m for mechanical operations, and the stack width is not more than 2.5m;

(7) There should be a certain passage between the stack and the stack, the inspection channel is generally 0.5m, and the access channel depends on the size of the material and the transportation machinery, generally 1.5-2.Om;

(8) The bottom of the stack is raised. If the warehouse is a sunny cement floor, the height of 0.1m is sufficient; if it is a muddy floor, it must be raised by 0.2~0.5m.If it is an open field, the height of cement floor is O·3~O·5m, and the height of sand and mud surface is 0.5~O.7m. 9) The angle steel and channel steel should be laid down in the open, that is, the I-beam should be placed upright. , The I-slot surface of the steel pipe should not face upwards to avoid rusting due to accumulation of water

3. Packaging and protective layer of protective material

The preservative or other plating and packaging applied by the steel factory before leaving the factory are important measures to prevent the material from being corroded. It must be protected during the transportation and loading and unloading process. It cannot be damaged and the storage period of the material can be extended.

4. Keep the warehouse clean and strengthen the maintenance of materials

(1) Before entering the warehouse, the materials should be prevented from being rained or mixed with impurities. The materials that have been rained or contaminated should be cleaned by different methods according to their properties, such as a wire brush with high hardness and a cloth with low hardness. , Cotton, etc.;

(2) The materials should be checked frequently after they are put into the warehouse. If there is rust, the rust layer should be removed;

(3) After the surface of general steel pipe is cleaned, it is not necessary to apply oil, but for high-quality steel, alloy thin steel plate, thin-walled pipe, alloy steel pipe, etc., after derusting, the inner and outer surfaces of the steel pipe must be coated with anti-rust oil before storage;

(4) For steel pipes with severe corrosion, they should not be stored for a long time after derusting, and should be used as soon as possible.