Laser cutting square tube, convenient to cut round, u-shaped and other shapes
Laser cutting pipe processing is to use high energy density laser beam to heat the workpiece, so that the temperature of the workpiece rises rapidly, reaching the boiling point of the material in a short time, and the material starts to vaporize and form steam. The steam is ejected at a very high speed, and at the same time, a gap is formed in the material.
Stainless steel below 4mm can be cut by laser cutting equipment, and carbon steel with a thickness of 20 mm can be cut by adding oxygen to the laser beam
However, after oxidation cutting, an oxide film will be formed on the cutting surface. The thickness of oxy cutting can be increased to 20 mm, but the size error of the cut parts is relatively large.
Since there is no tool cost, laser cutting china equipment can also be used to produce small batches of various sizes that could not be processed before
Laser cutting china equipment usually uses computer numerical control technology (CNC) devices. After using the device, cutting data can be received from a computer-aided design (CAD) workstation via a telephone line.
The principle of laser cutting is to irradiate the workpiece with a focused high-power density laser beam to melt, vaporize, ablate or reach the ignition point of the irradiated material. At the same time, the molten material is blown away by the high-speed airflow coaxial with the beam, so as to realize the cutting of the workpiece.
