Painting processing is a messy project. There are many precautions. The surface painting of rubber products prevents dust pollution. If conditions permit, independent air supply and exhaust equipment should be selected for the entire painting production line to ensure clean air throughout the laser cutting.
All paint thinners used are flammable liquids and have certain toxicity. Therefore, the spray paint processing construction site should follow the operation and safety operating procedures; it is necessary to adopt effective fire prevention, anti-static and other safety measures. After the heat source of the drying furnace is closed, the suspension chain should continue to work for 15 minutes to 20 minutes to prevent damage to the conveyor chain.
Clean the drying furnace and flash room regularly with a vacuum cleaner, and keep the interior clean and tidy; the spray gun and affiliated equipment should be cleaned in time after use to prevent blockage. In the process of spray painting, there will be a phenomenon of poor curing of the paint film, which then affects the expected effect of the entire spray painting process. There are two main reasons for this phenomenon. Appropriate improvement measures are adopted for these two aspects to prevent poor curing of the paint film during painting processing.